How Many Squares Fit in a Roofing Dumpster?

A 20-yard dumpster with a 2-ton (4,000 lb) allowance holds about 17 squares of 3-tab shingles, about 11 squares of architectural shingles, or about 10 squares of heavy designer shingles. Those counts assume one layer. Squares beyond these counts add weight that is billed at $100 per ton above 2 tons.

Key Takeaways

  • One roofing square equals 100 sq ft of roof surface.
  • About 17 squares of 3-tab or 11 squares of architectural shingles fit within 2 tons.
  • Squares within allowance = 4,000 ÷ (weight per square × layers).
  • Two layers halve the squares that fit within the allowance.
  • Wet shingles weigh more; load them dry when possible.

What is a roofing square?

A roofing square is 100 square feet of roof surface. Roofers, shingle manufacturers and insurance adjusters all measure roofs in squares. A 2,000 sq ft roof is 20 squares. Most architectural shingles, including GAF Timberline HDZ, are packaged at 3 bundles per square, so bundle counts convert directly to squares.

How many squares fit within 2 tons, by shingle type?

Shingle typeTypical weight per squareSquares within 2 tons (one layer)Squares within 2 tons (two layers)
3-tab asphalt200 to 250 lbsabout 16 to 20about 8 to 10
Architectural asphalt300 to 400 lbsabout 10 to 13about 5 to 6
Designer / luxury asphalt400+ lbsabout 10 or fewerabout 5 or fewer

These are typical ranges. The exact weight per square for your product is printed on the bundle wrapper or the manufacturer’s spec sheet, and that number gives the most accurate count. For how weight allowances work on other heavy debris, see the construction dumpster weight limits guide.

How do I calculate squares for my own roof?

Use this formula:

Squares within allowance = 4,000 lbs ÷ (weight per square × number of layers)

Then subtract about 5 to 10 percent for underlayment, nails and flashing.

Example: architectural shingles at 350 lbs per square, one layer. 4,000 ÷ 350 = 11.4 squares, or about 10 to 11 squares after accessories.

Example with two layers: 3-tab at 230 lbs per square. 4,000 ÷ (230 × 2) = 8.7 squares, or about 8 squares after accessories.

What if my roof has more squares than the allowance?

Weight above 2 tons is billed at $100 per ton. For a 25-square architectural roof at about 350 lbs per square, that’s about 4.38 tons, or 2.38 tons over the allowance. For roofs over about 20 squares, call (469) 770-7346 before booking so the haul can be planned around the weight. Package prices and fees are in the dumpster rental pricing guide.

How do layers change the squares count?

Each layer doubles the weight per square of the roof. A 20-square roof with two layers of architectural shingles carries the debris weight of a 40-square single layer. Count layers at a roof edge or gable before you book, or ask your roofer to note the layer count on the estimate.

How do I find my roof’s square count?

Your roofer’s estimate or insurance adjuster’s report usually lists squares. Without one, measure each roof plane’s length and width, multiply, add the planes together and divide by 100. Steep roofs common on newer homes in Frisco, Prosper and McKinney have more squares than their floor area suggests. For a professional measurement, the National Roofing Contractors Association (NRCA) member directory lists roofing contractors by location.

Does wet weather change shingle weight?

Yes. Shingles torn off after rain hold water, which adds weight and can push a load over 2 tons. North Dallas spring storm season makes this common on hail-repair jobs. Tarp the container overnight and load shingles dry when possible.

How should I load shingles to protect the allowance and the driveway?

Load shingles flat and low, spread evenly across the floor, and keep other heavy debris out of the shingle load. Check the acceptable disposal items list before tear-off day. Dumpster Quest’s rubber-tired trailer keeps a heavy load off steel rails; see driveway-safe dumpster rentals.

What happens to the shingles after pickup?

Asphalt shingles are often recycled into road paving. According to ShingleRecycling.org, more than 16 million tons of shingle waste have been recycled into asphalt roads since 2009.

Plan Your Roofing Dumpster

Know your squares, shingle type and layers? Call Dumpster Quest at (469) 770-7346 or request a quote online and we’ll estimate your load before delivery. Your 20-yard rubber-tired trailer starts at $390 for 2 full days with 2 tons included.

Frequently Asked Questions

1. How much overage do 30 squares of shingles add?

$325, based on about 5.25 tons for 30 squares of architectural shingles, or 3.25 tons over the 2-ton allowance. Call (469) 770-7346 to plan a roof that size.

2. Do 3-tab shingles fit more squares than architectural?

Yes. 3-tab shingles weigh about 200 to 250 lbs per square, so about 16 to 20 squares fit within 2 tons versus about 10 to 13 for architectural.

3. Is the 2-ton allowance enough for a garage roof?

Yes. A detached garage of 3 to 6 squares stays well under 2 tons.

4. Does underlayment count toward the weight?

Yes. Underlayment, nails and flashing add about 5 to 10 percent to the shingle weight.

5. Are there 3 bundles in a square of shingles?

Yes, for most architectural shingles, including GAF Timberline HDZ. Divide your bundle count by 3 to get your square count.

6. Do two layers of architectural shingles fit within the 2-ton allowance?

No, not for most roofs. At about 350 lbs per square per layer, two layers reach 2 tons at roughly 5 to 6 squares, so most two-layer tear-offs carry average weight.

Share:

More Posts

Send Us A Message

Request A DUMPSTER

Dependable dumpster rentals designed to keep your project moving. Request a dumpster now!